Fixed Displacement Motors - GM Series
Technical Characteristics:
Fixed Displacement Motors - GM Series
GM series motors are a result of many years of experience gained with preceding series motors. They incorporate a number of design variations intended to increase the strength of the motor casings and the load capacity of the internal dynamic components. The result is a series of motors with high continuous power ratings, both because of
the reduced internal specific loads and because of the high mechanical and volumetric efficiency that contribute in reducing the amount of heat
produced and therefore also the negative effects associated with it. The series presents an excellent contamination and cavitation resistance.
Used for:
If high starting torque and rotation control are required.
GM03
Displacement = 25 – 100
(cm3 / rev)
Specific Torque = 0.4 – 1.6
(Nm / Bar)
Peak Power = 15
(kW)
GM05
Displacement = 40 – 200
(cm3 / rev)
Specific Torque = 0.62 – 3.04
(Nm / Bar)
Peak Power = 20 – 33
(kW)
GM05 (no drain line)
Displacement = 40 – 200
(cm3 / rev)
Specific Torque = 0.62 – 3.04
(Nm / Bar)
Peak Power = 20 – 33
(kW)
GM1
Displacement = 99 – 314
(cm3 / rev)
Specific Torque = 1.54 – 4.90
(Nm / Bar)
Peak Power = 48
(kW)
GM2
Displacement = 192 – 623
(cm3 / rev)
Specific Torque = 3.0 – 9.73
(Nm / Bar)
Peak Power = 59
(kW)
GM3
Displacement = 352 – 987
(cm3 / rev)
Specific Torque = 5.49 – 15.4
(Nm / Bar)
Peak Power = 80
(kW)
GM3A
Displacement = 352 – 792
(cm3 / rev)
Specific Torque = 5.60 -12.60
(Nm / Bar)
Peak Power = 80
(kW)
GM4
Displacement = 402 – 1316
(cm3 / rev)
Specific Torque = 0.27 – 20.5
(Nm / Bar)
Peak Power = 100
(kW)
GM5A
Displacement = 526 – 2007
(cm3 / rev)
Specific Torque = 8.22 – 31.3
(Nm / Bar)
Peak Power = 120
(kW)
GM6
Displacement = 1690 – 3041
(cm3 / rev)
Specific Torque = 26.4 – 47.5
(Nm / Bar)
Peak Power = 170
(kW)
GM7
Displacement = 1373 – 4663
(cm3 / rev)
Specific Torque = 21.9 – 74.2
(Nm / Bar)
Peak Power = 250
(kW)